Individualised treatment options may include

Balloon Valvuloplasty

Balloon aortic valvuloplasty is a treatment option for severe, symptomatic aortic stenosis. During this procedure, a balloon is inflated within the damaged aortic valve with the aim to increase the size of the valve, therefore relieving symptoms temporarily. Balloon aortic valvuloplasty may be done prior to a formal Transcatheter Aortic Valve Implantation (TAVI) procedure to assess the therapeutic response of a patient before performing the formal TAVI procedure.

Balloon Valvuloplasty is a procedure “that is not a cure or fix of the aortic valve, although we can provide relief of the aortic stenosis for a period of time,” says Interventional Cardiologist, Dr Alex Willson. He further notes in the above video that this procedure is typically reserved for high risk or frail patients, as a bridge to further treatment, or in the assessment of how the patients will respond to treatment.

The treatment is considered temporary only, as the damaged valve will likely return to its previous state over time. It has emerged that restenosis and recurrence of symptoms are often seen in as little as 6 months post balloon valvuloplasty. The goal for this treatment is to try to reduce the transaortic valvular pressure gradient by as much as 50 mmHg. The patient may see a return of symptoms such as heart failure and other signs of aortic stenosis rapidly due to the severity of the diseased valve.

This percutaneous procedure is carried out in a Cardiac Catheter Lab and is often considered a palliative option for those patients deemed not suitable for other cardiac procedures, due to intraoperative surgical risk or other factors. Balloon aortic valvuloplasty may also be used as a bridge to aortic valve repair or replacement while a patient recovers sufficient physical strength to sustain a more formal TAVI or surgical aortic valve replacement.


Image 1: Example of a Balloon Valvuloplasty procedurePatient Disclaimer: All content on the Hope For Hearts site is created and published online for general information purposes only. It is not intended to be a substitute for professional medical advice and should not be relied on as health or personal advice. Please see your doctor if you have any questions or concerns.

Surgical Aortic Valve Repair (SAVR)

Surgical aortic valve replacement is a treatment option for aortic stenosis.

Surgical aortic valve replacement is an open heart procedure, where the sternum is divided to visualise the heart. Once the heart is accessed, patients may be put on a heart-lung machine for the duration of the procedure, while cardiac surgeons replace or repair the aortic valve. At this time the surgeon may also perform other procedures if needed, such as coronary artery bypass grafting, to avoid the patient requiring an additional operation.

Cardiothoracic Surgeon Dr Jim Dimitriou explains the difference between the surgical aortic valve replacement (SAVR) and transcatheter aortic valve implantation (TAVI). Further explaining the considerations for age and use of warfarin, and the importance of the structural heart team, “in the general management of the patient, the best way forward is not to think of it as your procedure or my procedure, but the management of aortic stenosis.”


Traditional open-heart vs minimally invasive approach

In some cases of Aortic Stenosis, there may also be an associated need to replace a portion of the aorta and the aortic valve. This is called a “Bentall’s Procedure” and replaces the aortic valve and the aortic arch with a manufactured graft that replaces the diseased aorta. The aortic valve may be replaced by a new valve that may be made of either biological material (porcine or bovine) or a metal valve (usually cobalt). Cardiothoracic Surgeon, Dr George Matalanis, explains what materials are used in the Bentall’s Procedure in the below video.

Recovery Period

Patients will often spend a few days within the intensive care unit (ICU) for close monitoring. Once the patient is ready to leave the ICU, they transition to the ward for monitoring until the surgical team decides the patient is fit for discharge home. A full recovery can usually take up to 8 weeks, although individual recovery times can vary. Most patients are able to drive in about 3 to 8 weeks after surgery. The surgical team will provide specific guidelines regarding recovery.

Transcatheter Aortic Valve Implantation/Replacement (TAVI)

 

The TAVI Procedure

In a TAVI procedure, a biological (tissue) valve is mounted inside a stent (a circular wire mesh). The stent is then compressed so that it can fit inside a small delivery sheath (tube). The TAVI valve is then delivered to the aortic valve, the stent is expanded, and the biological valve inside begins to work. In TAVI the calcified leaflets of the patient’s diseased aortic valve are not removed; instead, they are pushed to the side when the stent expands and help to lock the stent in place.

Dr Matthew Brooks, Interventional Cardiologist, discusses the improvements the percutaneous treatment option, transcatheter aortic valve implantation (TAVI) has had for the treatment of aortic stenosis. In Australia, typically a TAVI can now be performed under local anesthetic and can be as short as 40 minutes. “It’s minimally invasive, and the results from the procedure are tremendous in terms of valve function and the complication rate is very low.”

There are multiple ways of delivering the TAVI valve to the aortic valve position including:

  • Transfemoral – The delivery sheath is inserted into the femoral artery in the patient’s groin, and the TAVI valve travels upwards through the artery to the aortic valve.
  • Transapical – A 5-10cm horizontal incision is made on the left side of the chest below the nipple line, which provides direct access to the heart. The delivery sheath is then inserted in the apex of the heart and the TAVI valve inserted.
  • Transaortic – A small incision at the top of the sternum (breast bone) is made and that the delivery sheath is inserted into the aorta (the large blood vessel that the aortic valve is in).7

The Transcatheter Aortic Valve Implantation (TAVI) procedure is explained in detail in the below video, narrated by Dr Alex Willson, Interventional Cardiologist. Commonly performed from the femoral artery, a large sheath is inserted and a wire is placed across the aortic valve positioned within the left ventricle. The transcatheter valve is positioned within the abdominal aorta, it is then advanced across the aortic arch and positioned across the aortic valve. Once the position is accurate the balloon is deflated which deploys the transcatheter valve.

TAVI Procedure: Step-By-Step
  • Step 1 of 4

    A small incision is made into the Femoral Artery in your groin. Then a sheath is introduced into the artery and a long radiopaque wire is inserted into the sheath, this will sit just superior to the aorta. This allows the introduction of a larger sheath which will deliver the new aortic valve.

  • Step 2 of 4

    The new aortic valve is placed on a delivery sheath, compressed and made small enough to be delivered through the catheters already in the femoral artery.

  • Step 3 of 4

    The radiopaque guidewire is introduced into the heart, and the delivery sheath is placed in position within the diseased native aortic valve. A balloon is inflated to increase the size of the native valve, and then a new valve is deployed within the old diseased valve. The catheters are then removed from the femoral artery.

  • Step 4 of 4

    The new valve will begin working as soon as the catheters and wires are removed from the heart. Echocardiography testing during the procedure ensures that your new valve is functioning as effectively as it should. The femoral artery may be closed to prevent bruising and bleeding at the site.

The Complications of TAVI

“Unfortunately, there will never be a way to replace someone’s heart valve without any risk at all, but similarly the risks are very low and very acceptable,” Interventional Cardiologist, Dr Ronen Gurvitch explains the possible risks associated with transcatheter aortic valve implantation (TAVI). This Includes the common risks such as bruising or discomfort around the incision area, permanent pacemaker, and a very small risk of potential stroke or needing to convert to open heart surgery.

Reference: https://hopeforhearts.com.au/treatment